Textile waste is being used for 70% and our bio based ingredients are 30%. Our list of chemicals are waterbased resin, natural rubber (not vacanized) and starch. These ingredients are certified safe use through GRS.

No it cannot be. STELAPOP is working with all types of textile, cotton, polyester, spandex, etc. Waste raw material itself is not bio-degradable.

Yes, STELAPOP material can be mould during raw material sheet with some heat of 60-70 degree celcuis for best curve. However, coated material version cannot be curved. Its function is for flat surface only.

STELAPOP material has 1,200kg/m3 which considers as high density material board. One square meter of 5-6mm sheet can weight approximately 6-7kgs.

STELAPOP material is not metal/knife resistant. Heat surface resistant can be go to only 80-90 degree celcuis. Always need a placemat before placing a heated containers/hardware.

Our panel can work just like wood. You can use table saw, beam saw or CNC to cut the material. Please visit our YouTube channel.

After cutting, our material edge should be sealed. Our panels can work with any sealant, water base coating, acrylic coating or PU coating.

No, our material is not fire proof. Fire resistant can be offered upon development request.

Our material has water resistant function.

At moment properties, Stelapop material sheet can only work for indoor, not for outdoor use.

Our material is classified as E0 material. The sheet doesn’t emit any air toxic.

Yes, our material has food contact test under FDA regulation.